Zenoah G26 Marine Gas Engine (PREORDER)

SPECS:

Idle Speed: 3500RPM

Max Power: 2.16/12,000RPM

Max Torque: 1.94/9,500RPM

Weight: 3.3lbs (1520g)

Distance/Pull Starter to end of Front Crankcase: 5.6" (142mm)

Distance/Pull Starter to center of Engine: 3.4" (87mm)

Cooling Jacket Diameter: 2.1" (53mm)

Height/Starter Attachment Plate to Tip of Spark Plug: 7.1" (181mm)

Height/Center of Engine to Tip of Spark Plug: 5.4" (138mm)

Distance between Mounting Hole Centers Side to Side: 3.7" (95mm)

Distance/Mounting Hole Centers Top to Bottom: 2.5" (63mm)

Carburetor Settings- Carb is factory set, readjust only if engine is running incorrectly Idle Screw: Turn clockwise to increase idle and counterclockwise to decrease idle Low Speed Needle: 1/4 turn open from maximum RPM position High Speed Needle: 1/8 - 1/4 turn open from maximum RPM position

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: